►
Familiarize yourself with the operational environment before beginning
work.
►
Should faults or changes in the operating behavior occur during work,
immediately stop all work with the machine, shut the machine down, and
report the incident to the supervisor.
►
If indicator lights or warning messages light up during operation, immedi‐
ately stop all work with the machine, shut the machine down, and report
the incident to the supervisor.
►
Make sure that the stability of the machine is assured.
►
Do not exceed the permissible front-rear tilt and lateral tilt.
►
Adapt the driving speed to the load and the condition of the ground.
►
The ground must be in such a condition that it is suitable for taking up
the ground pressure coming from the machine.
►
For reasons of safety, keep a sufficient distance away from the exca‐
vation pits and embankments.
►
Only operate the bodies on a straight/even surface.
►
Observe the material properties of the material being transported
where applicable. Sticky materials can, for example, adhere to the
machine and cause a shifting of weight.
►
Watch out for lengthening braking distances when driving at higher
speeds, on slippery surfaces, and during downhill driving.
►
Always park and leave the machine as described in the documentation.
50-020-1011-900_EN
1.0 - © 2/15/2017
70
3 Safety
3.16 Safe working when driving and tipping
To Next Page
Loading...
