The danger area when the rear tipping trough is raised is between the rear
tipping trough (1) and the machine frame (3). The danger area may only be
entered if the trough is secured with the supports (2) against unintentional
movement. The supports have to be seated on the machine frame via the
mounts.
Securing the rear tipping trough:
►
Release the retaining screws for the supports.
►
Move the supports into position.
The supports are only allowed to be brought into position from the out‐
side.
►
Lower the rear tipping trough until the supports are resting against the
machine frame via the mounts.
50-020-1011-900_EN
1.0 - © 2/15/2017
79
3 Safety
3.19 Danger areas on the machine
To Next Page
Loading...
