114
Warnings
Warning functions
Warning message Warning display
Presser foot is not lowered
This message is displayed when the Start/stop button or
the needle up/down position button is pressed while the
presser foot is raised.
Presser foot is not raised
This message is displayed when the embroidery module
will initialize while the embroidery foot is lowered.
Bobbin winding
This message is displayed when the bobbin winder is
winding the bobbin
Push the bobbin winder spindle to the left
This message is displayed when the bobbin winder
spindle is still positioned to the right.
The upper thread is broken
This message is displayed when the upper thread is
broken.
Please check and rethread the upper thread.
502020.83.11_2013_06_bernette chicago 7_EN
To Next Page
Loading...
