Bernette Chicago 7 - Buttonhole Stitching

43
Basic Sewing Procedures
Buttonhole Stitching
0 : For thin or medium fabric
A-86 : For thin or medium fabric
A-87 : For suits or overcoats
A-88 : For horizontal buttonholes on thick fabrics
A-89 : For thin or medium fabric
A-90 : For thick coats
A-91 : For jeans or trousers
A-92 : For jeans or stretch fabric with a coarse weave
• Mark the positions of the buttonhole on the fabric.
The maximum buttonhole length is 3cm (1 3/16 inch). (Total of
diameter + thickness of button.)
• Attach the buttonhole foot, then pull out the button
holder plate and insert the button.
• The size of the buttonhole is determined by the button
inserted in the button plate.
• The thread should be passed through the hole in the
presser foot, then be placed under the foot.
• Select the buttonhole stitch.
• Adjust the stitch width and the stitch length to the
desired width and density.
A Starting point
Before sewing a buttonhole on your project, practice on a
scrap piece of the same type of fabric.
Note
0
A-87
A-91
A-92
A-93
A-90
A-86
A-88
A-89
2.5~7.00.3~1.0
2.5~5.5
5.5~7.0
3.0~7.01.0~2.0
3.0~7.01.0~3.0
0.3~1.0
0.3~1.0
DD
A
0
A-87
A-91
A-92
A-93
A-90
A-86
A-88
A-89
2.5~7.00.3~1.0
2.5~5.5
5.5~7.0
3.0~7.01.0~2.0
3.0~7.01.0~3.0
0.3~1.0
0.3~1.0
DD
A
0
A-87
A-91
A-92
A-93
A-90
A-86
A-88
A-89
2.5~7.00.3~1.0
2.5~5.5
5.5~7.0
3.0~7.01.0~2.0
3.0~7.01.0~3.0
0.3~1.0
0.3~1.0
DD
A
0
A-87
A-91
A-92
A-93
A-90
A-86
A-88
A-89
2.5~7.00.3~1.0
2.5~5.5
5.5~7.0
3.0~7.01.0~2.0
3.0~7.01.0~3.0
0.3~1.0
0.3~1.0
DD
A
502020.83.11_2013_06_bernette chicago 7_EN