Bernette Chicago 7 - Narrow Hemming

55
Basic Sewing Procedures
• Fold the edge of the fabric over about 3mm, then fold
it over again 3mm for about 5cm along the edge of the
fabric.
• Position the needle in the fold by turning the handwheel
towards you, and lower the presser foot.
• Sew several stitches and raise the presser foot.
• Insert the fabric fold into the spiral opening of the hem-
mer foot.
• Move the fabric back and forth until the fold forms a
scroll shape.
• Lower the presser foot and start sewing slowly guiding
the raw edge of the fabric in front of the hemmer foot
evenly into the opening of the foot.
* The hemmer foot accessory is optional. It is not included with this machine.
Narrow Hemming
502020.83.11_2013_06_bernette chicago 7_EN