Bernette Chicago 7 - Overlock Stitches; Using the All- Purpose Foot

40
Basic Sewing Procedures
Change the presser foot to the overlock foot (E).
Sew the fabric with the fabric edge against the guide of the
overlock foot.
Overlock Stitches
Change the presser foot to the All-purpose foot (T).
When sewing the overlock using the All-purpose foot, sew
along the edge of the fabric so that the needle drops over the
edge of the fabric on the right side.
Using the All- purpose foot
The overlock foot should be used to sew with Direct Group
Patterns 5 and 8 only. Do not set the stitch width narrower
than «5.0». It is possible that the needle could hit the presser
foot and break when sewing other patterns and width.
AtteNtioN!
2.5~4.52.0-3.0
6 A-02
2.5~4.52.0-3.0
6 A-02
2.5~4.52.0-3.0
6 A-02
2.5~4.52.0-3.0
6 A-02
2.5~4.52.0-3.0
6 A-02
2.5~4.52.0-3.0
6 A-02
2.5~4.52.0-3.0
6 A-02
2.5~4.52.0-3.0
6 A-02
502020.83.11_2013_06_bernette chicago 7_EN