92
Embroidery Setup
Hooping the fabric
• Loosen the embroidery hoop adjustment screw on the
outer hoop.
• Separate the inner and outer hoop by removing the
inner hoop upward.
• The fabric is hooped with the right side up.
• Place the fabric with the stabilizer material on top of the
outer hoop.
• Press the inner hoop down.
• Push down firmly until the inner hoop fits securely into
the outer hoop.
• Align the fabric with the inner hoop (a) and the outer
hoop (b).
• Tighten the adjustment screw to secure the fabric.
• Tighten the fabric by hand.
• After tightening the fabric, make sure that the fabric is
stretched tautly in the hoop.
502020.83.11_2013_06_bernette chicago 7_EN
To Next Page
Loading...
