Bernette Chicago 7 - Buttonholes on Stretch Fabrics

47
Basic Sewing Procedures
Buttonholes on stretch fabrics
When sewing buttonholes on stretch fabric, hook a heavy
thread or a cord under the buttonhole foot.
• Attach the buttonhole foot and hook the cord at the
back of the presser foot.
• Bring the two cord ends to the front of the foot and
insert them in the grooves, then temporarily tie them
there. Lower the presser foot and start sewing.
• Set the stitch width to match the diameter of the cord.
• Once the sewing is completed, pull the cord gently to
remove any loose parts, then trim off any excess.
It is recommended to use stabilizer on the backside of the
fabric.
Note
A-87
A-91
A-90
A-92 A-93
A-86 A-88 A-89
0
A-87
A-91
A-90
A-92 A-93
A-86 A-88 A-89
0
502020.83.11_2013_06_bernette chicago 7_EN