95
Embroidery Setup
Tear-away stabilizers
• Excess is easily torn away.
• One or more layers can be used.
• Available in different weights.
• For more stability, apply to the wrong side of the mate-
rial with temporary adhesive spray before hooping.
• Carefully tear away excess stabilizer from the back of
the embroidery after stitching.
• Designs are not skewed.
• Stabilizer will remain under larger embroidered areas.
Application
– For all woven materials and materials without
stretch.
Cut-away stabilizers
• One or more layers can be used.
• Available in different weights.
• For more stability, apply to the wrong side of the mate-
rial with temporary adhesive spray before hooping.
• Carefully cut away from the back of the embroidery
after stitching.
• Designs are not skewed.
• Stabilizer will remain under larger embroidered areas.
Application
– For all elastic materials.
Stabilizer
502020.83.11_2013_06_bernette chicago 7_EN
To Next Page
Loading...
