Bernette Chicago 7 - Page 46

44
Basic Sewing Procedures
• Position the fabric under the presser foot so that the
centerline‘s mark is aligned with the center of the but-
tonhole foot.
• Lower the buttonhole lever.
• Hold the upper thread slightly and start sewing.
Gently feed the fabric by hand. Before stopping, the
machine will automatically sew a securing stitch after the
buttonhole is sewn.
The buttonhole stitch was selected and the Start/Stop
button was pressed while the buttonhole lever is raised, the
LCD will display the warning massage to remind you to
lower the buttonhole lever.
Note
Note
0
A-87
A-91
A-92
A-93
A-90
A-86
A-88
A-89
2.5~7.00.3~1.0
2.5~5.5
5.5~7.0
3.0~7.01.0~2.0
3.0~7.01.0~3.0
0.3~1.0
0.3~1.0
DD
A
0
A-87
A-91
A-92
A-93
A-90
A-86
A-88
A-89
2.5~7.00.3~1.0
2.5~5.5
5.5~7.0
3.0~7.01.0~2.0
3.0~7.01.0~3.0
0.3~1.0
0.3~1.0
DD
A
A-87
A-91
A-90
A-92 A-93
A-86 A-88 A-89
0
502020.83.11_2013_06_bernette chicago 7_EN