56926BA2, Rev. 02, 04/2019
2 Safety
When operating in areas with danger of explosion, observe the specific safety
notes and installation instructions in the safety manual / explosion protection man-
ual.
2.1 Dangers and safety measures
• Read these instructions and all applicable documents thoroughly and com-
pletely before working with the product.
• Store the instructions where they are accessible for all users at all times.
2.2 Proper Use
The detectors are used along with an appropriate evaluation unit of
BERTHOLD TECHNOLOGIES GmbH & Co. KG and an appropriate radiation source to
measure the radiation intensity as part of a radiometric measurement.
The following constitutes proper use:
• Strictly adhering to the instructions and procedural sequences and perform no
unauthorised third party actions that endanger your safety and the functional
efficiency of the detectors!
• Observing the provided safety instructions!
• Carrying out the prescribed maintenance measures or having them carried out
for you!
Improper Use
• Failing to observe the specified safety instructions and instructions for the op-
eration, maintenance and disposal in the manual.
• Any non-compliance with the present manual for the supplied products.
• Applying conditions and requirements which do not conform to those stated in
the technical documents, data sheets, operation and assembly instructions and
other specific guidelines of the manufacturer.
• Using the product in a damaged or corroded condition.
• Restructuring or changing the system components.
• Repairs of detectors that are used in hazardous areas by persons who are not
authorised by Berthold Technologies GmbH & Co. KG.
• Using the product with
o open or not properly closed cover
o improperly closed entries,
To Next Page
Loading...
