LB 983 NightSHADE Operating Manual Quick Start
39
The Post Processor page offers additional image processing features which can be performed
after the exposure to increase the image quality.
Cosmic suppression
is an imaging filter to get rid of small high intensity pixels caused by cosmic ray during
the exposure.
Background Correction
subtracts a specific amount of counts from the current image. The background is calcu-
lated using the lowest intensities on the image.
Flatfield Correction
corrects the uneven image caused by the vignetting of the lens
Just enable the cosmic suppression to avoid cosmic spots during longer exposures. Clicking on
the button will open the parameter box to adjust the image processing filters.
Since luminescence is measured no filter is necessary. That requires the selection of the empty
/ photo position in the emission filter settings. To ensure a proper energy calibration check the
wavelength mentioned in the input box.
To close the luminescence parameter wizard select .
The summary of the new created luminescence measurement is given:
To Next Page
Loading...