LB 983 NightSHADE Operating Manual indiGO Software Documentation
99
The Instrument Controller Setup is used to setup your NightShade or NightOwl device and to
perform all system calibration tasks.
6.10.4 Device State
The <Device State> command can be used to display the current states of the instrument, the
camera and the scheduler.
Raw device commands and test operations can be executed using the context command but-
tons.
6.10.5 Quick Check
The <Quick Check> command can be used to get access to highlevel quickcheck commands
for photo, luminescence and fluorescence.
To Next Page
Loading...