Quick Start LB 983 NightSHADE II Operating Manual
42
By using the “Region of Interest” a section of the CCD chip can be defined to get faster
framerates. By default the whole chip area is used which is 1 to 1024 in X and Y.
The MultiSample feature allows the possibility to split the image into sections. Each section is
treated as a single sample identity. This feature might be useful for animal imaging in case that
more than one animal at a time is measured. The X-Images and Y-Images define the amount of
samples in X and Y direction. This feature is limited to five images in each direction (max 25
sample-ID´s per measurement).
To close the application wizard select .
To Next Page
Loading...