System Description LB 983 NightSHADE II Operating Manual
74
Front side
o Light-tight door with handle to close the acquisition chamber
o Door for loading and unloading the filter slider for fluorescence emission
(LuFlu only)
o Operating status indicator
o Inside the acquisition chamber
o Inductive sensor detecting the door position
o Bottom plate (removable) to position the acquisition objects
o 4 LED's illuminating the acquisition chamber
o Connector field
o Liquid cooling connectors (for LED panel)
o LED panel control connector
o Outlet of the fluorescence light for connection of the illumination light guide
Rear panel/Top part
o Connection ports
o On/off switch
o Mains fuse
o Mains connector
o USB port (in)
o USB port (out – for side view camera)
o Camera power outlet (for side view camera)
o Liquid cooling in/outlet (for LED panels)
o Ventilation slits
At the side
o Carrying handles
o Camera bayonet for side view (left)
o Flange port for external feed through
Bottom
The NightSHADE stands on four feet; the height of these feet can be adjusted to balance une-
ven setup locations.
To Next Page
Loading...