Running the Repository Configuration Tool
The repository configuration tool creates a certificate on the host computer.
To run the repository configuration tool:
1. Run the repository configuration tool.
2. Click the Create Certificate button.
3. Enter a password for the exported certificate.
4. Click Export Certificate and choose a location for the file with the exported certificate.
5. Copy the exported certificate to a location that can be accessed by the appliance. You need to import the
certificate using the Diagnostics web site. See the following section.
Setting up the Appliance
You must set up the repository host before proceeding here.
On the appliance you must register the certificate that you created on the repository computer. Optionally, you can
change the archive settings such as how many days pass before the files are archived.
To configure archiving on the appliance:
1. Log on to the appliance Maintenance web site.
2. Select Security Settings from the menu.
3. Upload the certificate that you created on the host, and then click Upload Certificate.
4. Select Roles Editor from the menu.
5. Click PowerBroker Password Safe Web Portal.
6. Select the Enable Session Monitoring Archiving box.
7. Select the way to store the archive files:
– BITS – Enter the name of the repository computer.
Enter the name of the certificate. The certificate name is the same name as the repository computer.
– Windows File Sharing – Enter the name of the share and credentials to access the share. Windows file
sharing is the preferred method.
Configuring PowerBroker Password Safe
UVM Appliance User Guide 39 © 2018. BeyondTrust Software, Inc.
To Next Page
Loading...