Configuring NIC Teaming or Link Aggregation
Note: On the Microsoft Windows Server 2012 R2 appliances, the Broadcom Advanced Control Suite 4
application is already installed. Access the application from the Start menu. For all other appliances, you
can use the following procedure.
The appliance has a Broadcom NetXreme II four-port Network Interface card. Work with your Network
Administrator before you configure NIC teaming or aggregation. Your administrator must provide IP address
information for the environment where the appliance is being deployed.
You must download the Broadcom management utility before you can manage and configure NIC teaming.
For more information, contact BeyondTrust Technical Support to get the installer file.
Appendix B: Optional Appliance Configuration
UVM Appliance User Guide 58 © 2018. BeyondTrust Software, Inc.
To Next Page
Loading...
