Managing Your UVM
You can access appliance diagnostics to verify version information, request updates and configure other options.
Accessing the UVM Web Site
To log on to the UVM web site:
1. Using your web browser, enter:
https://[your IP Address]/Maintenance
2. For the initial login, enter the following information.
– User Name - Enter the Administrator user name created using the Configuration wizard.
– Password - Enter the Administrator password created using the Configuration wizard.
Session Timeout
A user can be logged on to an appliance web site for 14 minutes. After 12 minutes a message is displayed indicating
the session will expire in 2 minutes. The user must log on to the web site after the session expires.
Session timeout applies to all appliance web sites: Roles Editor, Maintenance, Diagnostics, and High Availability.
The session timeout value cannot be configured.
Activating Windows
If the Windows environment is currently not activated, you can activate on the Maintenance web site.
To activate Windows:
1. Select Maintenance from the menu.
1. Select Accounts and Licensing.
2. Click one of the following:
– Activate Online – Select when you have an Internet connection.
– Activate By Phone – Select if there is no Internet connection (for example, in an air-gap environment).
Requesting Product Updates
You can request product updates for the UVM. You can view the version number for the BeyondTrust products that
you are licensed to use.
To request updates:
1. On the BeyondTrust Updates page, click Request Update.
The update of the UVM and BeyondInsight database starts.
Managing Your UVM
UVM Appliance User Guide 9 © 2018. BeyondTrust Software, Inc.
To Next Page
Loading...
