126
Example: To set the TI-2 off-hook (pick up the phone) we would send the string
SET 1 TIHOOKSTATE 23 0<LF>
This tells the Audia to pick up the line for the dialer on instance ID 23 in unit number 1.
Example: To dial a phone number use 'DIAL' at the beginning of the string rather than SET/GET in other
commands. The string DIAL 1 TIPHONENUM 23 800-826-1457 tells Audia to dial 800-826-1457 on the
dialer at instance ID #23 (dashes are optional).
NOTE: The TI-2 can insert a delay as it is dialing a phone number by inserting a comma where desired.
Most PBX's will require a delay after acquiring an outside line.
* Can contain a decimal number.
To Next Page
Loading...
