Biamp AudiaFLEX - Page 125

125
* Can contain a decimal number.
Example: In the command: SET 1 AECNLP 24 3 3<LF>
We are telling Audia device 1 set the NLP on Instance ID 6, input 3 (index1), to aggressive (3). (We set
channel 3’s NLP to aggressive)
* Can contain a decimal number.
** Output Full Scale Level will only work on OP2e cards.
Example: In the command: SET 2 OUTMUTE 3 4 1<LF>
We are telling Audia device 2 to set the output mute Instance ID 3, output 4 (index1) to on.
(We muted the 4th output of Instance ID 3 of an Audia)