50
Fixed 12-Channel Output
If standard Audia
®
or AudiaSOLO hardware is being
used, then microphone level outputs are available on
4x12 configurations. However, to make use of this
feature, a Fixed 12-Channel Output block must be placed
in the layout. This block contains all of the features
normally found on an Output block, plus Mic Lvl 1, Mic
Lvl 2, Mic Lvl 3, and Mic Lvl 4 buttons. These buttons
allow each of Outputs 1~4 to be set for either microphone
level (-55dB) or line level (0dB).
To Next Page
Loading...
