66
Low Pass Filter
Filter / Slope selects the type (Linkwitz-Riley or
Butterworth) and slope of the filter. Cutoff Freq.
selects the cutoff frequency for the filter. Cutoff
Freq. may also be adjusted by dragging the cursor
shown inside the graph. Bypass disables the filter
without changing settings.
Right-clicking over certain settings will provide a
menu of additional options.
High Shelf Filter
Gain selects the amount of maximum cut or boost
applied by the filter. Cutoff Freq. selects the
cutoff frequency for the filter. These settings may
also be adjusted by dragging the cursor shown
inside the graph. Bypass disables the filter
without changing settings.
Right-clicking over certain settings will provide a
menu of additional options.
To Next Page
Loading...
