AS-i/PROFIBUS Gateway Operating the AS-i/PROFIBUS Gateway
Subject to reasonable modifications due to technical advances Copyright Bihl+Wiedemann, Printed in Germany
Bihl+Wiedemann GmbH · D-68199 Mannheim · Phone +49-621-339960 · Fax +49-621-3392239 · Internet http://www.bihl-wiedemann.de
issue date 7.1.2002
34
Once the desired PROFIBUS station address is shown on the display, it will be
stored non-volatile in the EEPROM by pushing the “mode” button.
5.8 Error Messages
The system displays error codes for error messages that do not
point to faulty assignments on the AS-i circuit. The code numbers
are larger than 50 and are therefore outside the slave address
range. These codes are described in the appendix, chapter 10.
To Next Page
Loading...
