79
clear all errors/events from the memory, the “*CLS” command can be
used.
The following table lists all the known errors that can be encountered.
4.4 SCPI Common Commands
The power supply is compatible with all IEEE-488.2 and SCPI commands.
Common commands generally control overall power supply functions
such as reset, status, and synchronization. All common commands
consist of a three-letter mnemonic preceded by an asterisk (*).
Commands ended with question mark (?) represent a query command.
The following table lists the common SCPI commands supported:
Return the instrument identification
(<Manufacturer>,
<model>, <serial number>, <firmware type and version>)
To Next Page
Loading...
Need help?
General
