12
Figure 2.2 – AC Power Cord
Fuse Replacement
This power supply does not require a fuse that is user replaceable.
There is an internal fuse, in which if blown, may indicate a malfunction
in the unit. In this event, contact B&K Precision.
Any disassembling of the case or changing the fuse not
performed by an authorized service technician will void
the warranty of the instrument.
2.2 Rackmount Installation
The PVS series power supplies are designed to fit in a space of two rack
units (2U) and can be mounted in a standard 19-inch rack panel or
To Next Page
Loading...
