29
Instrument settings can only be recalled when the instrument
enters this mode.
2. Use the keypad to enter the memory location you want to recall.
Enter between 0 – 9. The voltage and current settings of that
memory location will be shown on the bottom of the display.
3. Once entered, the saved settings at the location will be
immediately recalled.
Note: When in Recall mode, users can recall settings from
different locations without having to press additional keys
each time. For example, you can press 1 to recall settings in
location one, and then press 5 to immediately recall
settings in location 5.
4. To exit Recall mode, press .
Enable/Disable Key Sound
The instrument initially has key sound enabled from factory. To disable
or re-enable the key sound, follow the steps below:
1. From the SYSTEM menu, press button 2 times to select
BEEP and press .
2. Select between the two options using the rotary knob:
On– Enable key sound
Off – Disable key sound
3. Select the desired option and press to save the change.
4. To exit the menu at any time, press twice.
To Next Page
Loading...
Need help?
General
