_____________________________________________________________________
724-746-5500 | blackbox.com Page 104
PDS% 73**)*',%&0536%70((3A/#0(
"#'!>?;@ABCDE!>?;@A@FDE!>?;@AGHDE!>?;@AICDE!LES1308A, LES1316A, LES1332A, LES1348A,
LES1408A, LES1416A, LES1432A, and LES1448A console servers support internal cellular modems.
These modems first need to be installed (as described below in 5.6.1, 5.6.2 or 5.6.3) and then set up to
validate they can connect to the carrier network (as described below in 5.6.4 and 5.6.5). They then can be
configured for operation in Always- on cellular router or OOB mode, or in Failover mode (as detailed in
next section 5.7).
5.6.1 Connecting to a GSM HSUPA/UMTS carrier network
The LES1308A, LES1316A, LES1332A, and LES1348A have an internal GSM modem that will connect to
any major GSM carrier globally.
Before powering on the console server, you must install the SIM card provided by your cellular
carrier, and attach the external aerial antenna.
Note: The console servers each have two cellular status LEDs. The SIM LED on top of the unit should
go on solid when a SIM card has been inserted and detected.
Select Internal Cellular Modem panel on the System: Dial menu.
Check Enable Dial-Out Settings.
To Next Page
Loading...
