Black Box LES1508A - USB Port Connection

_____________________________________________________________________
724-746-5500 | blackbox.com Page 23
"#'!>?;@HBCDKLHE!>?;@H@FDKLHE!>?;@HGHDE!>?;@HICDKLHE!>?;@GBCDE!>?;@G@F DE!>?;@GGHDE!>?;@GICDE!
>?;@IBCDE!>?;@I@FDE!>?;@IGHD!+,5!>?;@IICD!D5<+,6'5!:2,%2.'!;'(<'(%!#+<'!3#'!:16.+5'%!LhKIA!
N$,2-3!%#2/,!,'93V!!
!
!
!
!
;B@%
FBY@LN%
=OZB@B!B+@%
=B>O7!B+@%
@!
L";!
L'S-'%3!"2!;',5!
Q-3N-3!
H!
X"L!
X+3+!"'(O$,+.!L'+51!
Q-3N-3!
G!
"eX!
"(+,%O$3!X+3+!
Q-3N-3!
I!
ZTX!
;$4,+.!Z(2-,5!
TD!
A!
:";!
:.'+(!"2!;',5!
U,N-3!
F!
LeX!
L'6'$<'!X+3+!
U,N-3!
^!
X:X!
X+3+!:+(($'(!X'3'63!
U,N-3!
C!
X;L!
X+3+!;'3!L'+51!
U,N-3!
!
!
The rackmount console servers also have a DB9 LOCAL (Console/Modem) port on front panel. The
LES1508A has a DB9 LOCAL (Console/Modem) port on rear panel. With the LES1508A, Serial Port 1 is
configured by default in Local Console (modem) mode.
Conventional CAT5 cabling with RJ-45 jacks is used for serial connections. Before connecting an external
device’s console port to the console server serial port, confirm that the device supports the standard
RS-232C (EIA-232).
8.+60!829!%-NN.$'%!+!(+,4'!27!6+R.'%!+,5!+5+N3'(%!3# +3!O+1 !R'!('S- $('5!32!62,, '63!32!3#'!O 2('!N 2N- .+(!
%'(<'(%!+,5!,'3/2(0!+NN.$+,6'%M!:+..!"'6#,$6+.!;-NN2(3!+3!^H IK^IFKAABB!72(!5'3+$.%M!
%
CDP% ?F9%;0,/%A0((3A/#0(%%
The LES1208A-R2, LES1216A-R2, LES1232A and LES1248A-R2 console servers each also have one
USB 1.1 port on the front face and two additional USB 2.0 ports at the rear face (adjacent to modem
jack).
The LES1308A, LES1316A, LES1332A, LES1348A, LES1408A, LES1416A, LES1432A and LES1448A
console servers each also have one USB1.1 port on the front face and one additional USB 2.0 port at the
rear face. This USB 2.0 port is adjacent to antenna connector and connects using the micro-AB USB
cable.
The LES1508A, LES1516A, LES1532A, and LES1548A console servers have two USB 2.0 ports on the
front face.
The USB 2.0 ports can be used for:
- connecting to USB consoles of Managed Devices (e.g. for managing UPS supplies)
- attaching other external USB peripherals (e.g. an external USB memory stick or modem)
- adding supported Sierra Wireless cellular USB modems
- plugging in USB hubs to provide additional ports
The USB 1.1 port is best reserved for use with an external USB memory stick dedicated to recovery
firmware boot images/ extended log file storage etc.