CONTROL OF SERVSWITCH™ DKM
109
Keyboard Commands:
<Cursor left> Cursor left Select User Port to the left
<Cursor right> Cursor right Select User Port to the right
<Cursor up> Line above Select monitor for current CPU Port or
Select keyboard/mouse for CPU Port one line above
<Cursor down> Line below Select keyboard/mouse for current CPU Port or
Select monitor for CPU Port one line below
<RETURN> Confirm selected monitor AND keyboard/mouse assignment (for CPU /
User Port at cursor position).
Attention: Switch command is executed immediately
<SPACE> Confirm selected monitor OR keyboard/mouse assignment (for CPU /
User Port at cursor position).
Attention: Switch command is executed immediately
<F1> Switch to ‚CON Ports’ Mask
<ESC> Return to Select Menu
To Next Page
Loading...
Need help?
General
