STATUS INFORMATION
77
7 Status Information
The status information of the ServSwitch™ DKM can be displayed in four different ways:
By means of a console connected to a console port via OSD
By means of a PC, a Browser and the web interface (under development)
By means of a PC and the serial interface (limited functionality)
By means of the supplied IR Remote Control at the LCD-Display (limited
functionality)
In all operation modes, the same masks are generated and displayed. Accordingly, the display
of status information is similar, independent from the method of access.
A description of the general frame structure as well as keyboard control is given in
Configuration via Console on page 38.