OVERVIEW
27
2.7.4 Selection of Color reduction for transfer acceleration
You can select, whether always 24 Bit colors (=full color depth) are transmitted or whether
the compression algorithm automatically switches between 16 and 24 Bit colors to accelerate
the data transfer (default). Normally the difference between 24 Bit and 16 Bit is not
recognizable but under some special circumstances e.g. in photo processing installations there
might be disturbing color abberations. While the automatic color switching enhances the
number of frames, transmitted per second, fixed 24 Bit color depth gives smooth color grades
under all circumstances. Please select your preferred mode.
To modify the color depth, see Setup at the Local Unit (Page 159).
To Next Page
Loading...
Need help?
General
