Black Box ServSwitch - Restart Your Switch

SERVSWITCH™ DKM CONFIGURATION
65
6.1.15 Restart your Switch
In the “Configuration” menu you can select from three options to restart the ServSwitch™
DKM:
6.1.15.1 Restart
By selecting „Restart“ the ServSwitch™ DKM will reboot with its current configuration.
Exception: If the parameter „Load Default“ in menu „System“ has been selected, the switch
will boot with the default configuration.
6.1.15.2 Default
By selecting „ Default“ the ServSwitch™ DKM will reboot with the default configuration.
6.1.15.3 Reset
By selecting „Reset“ the ServSwitch™ DKM will reboot with the original factory
configuration.
Exception: After a firmware update the ServSwitch™ DKM will reboot with the firmware
configuration