ServSwitch™ DKM
76
6.5.2 External Saving of Configuration Files
Open the configuration directory as described above.
Save the selected Configuration File to an external storage media.
This configuration file will work with the current switch firmware.
Compatibility with future firmware updates is possible, but cannot be
guaranteed.
6.5.3 Loading External Configuration Files
Open the configuration directory as described above.
Select a Configuration File from an external storage media and save it in the configuration
directory by replacing one of the files ‘default.sys’ or ‘config01.sys’ to’ config08.sys’.
The configuration can now be opened via the “Load” command (see page 45).
Overwriting one of the files ‘config.sys’ or ‘module.sys’ is not allowed.
These files are write-protected.
To Next Page
Loading...
