ServSwitch™ DKM
164
I.8. Specifications ServSwitch™-Media/KVM Units
Power Supply
Voltage
AC: 90-240VAC-0.5A-47-63Hz
DC: 5VDC-2000 mA
Power required
Local Unit: max. 5V/750mA
Remote Unit: max. 5V/750mA
Interface (depending on type of device)
Video source/Monitor
DVI up to 1920x1200@60Hz
Keyboard
USB (depending on model)
Mouse
USB (depending on model) 2-/3-button and wheel
mouse
RJ45
1000 Mbit High-speed transmission.
Wiring acc. EIA/TIA 568B Gigabit Ethernet
LC (Glass fibre)
1000 MBit High speed transmission. Corresponds to
Gigabit Ethernet
Audio Interface
Description
Bi-directional stereo audio link
Transmission Method
Digitized virtually CD quality audio (16-bit, 38.4KHz)
Signal Levels
Line-Level (5 Volts Pk-Pk maximum)
Input Impedance
47KOhm
Local Unit Connectors
2 x 3.5mm stereo jack socket (Line In & Line Out)
Remote Unit Connectors
2 x 3.5mm stereo jack socket (Line/Mic In & Line Out)
Microphone Support
A microphone may be connected to the Remote Unit.
Pullup resistor provides bias for condenser microphone.
Option to set microphone amplification to +17dB.
To Next Page
Loading...
