CONTROL OF SERVSWITCH™ DKM
103
8.2.3 Switching in „Follow Me“ Mask:
With the ‚ Follow Me’ option you can copy the display content from the CPU connected to
your console to several other consoles (video only). Thus, the own display content can easily
be displayed on one or more additional monitors.
Obviously, if you switch your current CON Port to another CPU Port, the additional displays
will also show the new display content (‚Follow Me’ function).
The function does NOT provide access to display contents shown on other user stations.
The function is valuable, e.g.:
If a presentation shall be displayed concurrently on a beamer
For supervision of control rooms, if a control display shall be accessible to all users
In case of requests, if you want to show your display content to a colleague or
administrator.
To enter into the „Follow Me“ Mask press <F2> from either “KVM-List” mask or “KVM-
Switch” mask.
For better orientation, the „Follow Me“ Mask shows the current connection status:
To Next Page
Loading...
Need help?
General
