BLU-JET LEGACY - Page 155

Task Procedures Illustrations
152
LEGACY
Primary Wing Gauge Wheel Assembly
Mounting
primary
gauge
wheels
NOTE:
Left-hand
and
right-hand
as viewed
from the
rear
d
a
g
L1
m
i
h
k
j
i
1. Mount (a) (AM6163) left-
hand wheel leg with 2-3/4”
spindle and (b) (AM6164)
right-hand wheel leg with
2-3/4” spindle in primary
wing weldment.
2. Insert (c) (BM33497) 1-3/4” x
14-3/4” pin into primary
wing weldment. Place (d)
(BP3205) 2-1/2” x 1-3/4” ID 10
GA. machinery bushings on
both sides of wheel leg tub as
pin is inserted.
Secure pin with (e) (BP3135)
5/8” x 3-1/2” hex cap screw
and (f) (BP3375) 5/8” Nylock
hex nut.
Left-hand side
from the rear
f
e
c
b
(AM6164)
right-hand wheel
leg with 2-3/4”
spindle
L2
Tractor Side