151
Task Procedures Illustrations
LEGACY
Single Wheel Center Lift Assembly
Mounting
tires
NOTE:
Left-hand
and
right-hand
as viewed
from the
rear
7. Before mounting the tires.
the tread will run to the rear
with valve stem on the hub
side.
Tire:
(AAM2788-1) 758 hub 3” x 16”
8. Lift tire (Right-hand or
Left-hand) into position
from the top.
9. Angle tire past hub and
algin with hub.
10. Replace and tighten lug nuts.
Tighten lug nuts evenly and
torque to 150 to 180 ft. lbs.
Check tire pressure; inate to
51 P.S.I. Max.
NOTE:
Valve stem
on each
wheel is
positioned
on the hub
side.
(30”, 15”
and 20”
spacings)
Left-hand from the rear
To Next Page
Loading...
