As supplied the first page of Normal display shows HCDP pump power consumption and
HCDP pump body temperature, and the second page shows HCMB pump power
consumption and HCMB pump-motor temperature. You can change the information shown
on the Normal display: refer to Section 5.4.
At any time, you can press one of the four menu buttons (7) to select a new menu. You can
then use the up (5), down (3), ENTER (6) and CANCEL (4) buttons to move through the
menu. The appropriate menu selected LED (8) is on when the corresponding menu is in use.
Use the menu (7), up (5), down (3), CANCEL (4) and ENTER (6) buttons as described below.
Refer to Section 4 for a full definition of the menu structures and the display formats.
Button LED colour Button use
Normal Green Press this button to select the Normal display (see above).
Control Green Press this button to select the Control menu. You can then take
control or release control of the iH system (see Section 5.5).
Status Green Press this button to select the Status menu. In this menu, you can
display the current values of all iH system sensors.
Setup Green Press this button to select the Setup menu. In this menu you can:
manually control the operation of iH gas purges and gate valves fitted
to the vacuum system (and connected to the iH through an iH
Interface Module with an Auxiliary Interface Card); select 'Run til
Crash'; change other display parameters (such as the pressure units
used when pressures are displayed and the timeout time). The Setup
menu also allows you to select the Service menu; in this menu, you
can zero the Gas Module flow transducer and manually operate the
components of the iH system.
ENTER - Use this button to select a currently displayed menu option or to enter
a currently displayed parameter.
CANCEL - Use this button to cancel the currently displayed menu or option and
return to the previous menu or option.
Up/down - Use these buttons to move up or down menu options or to increase or
decrease a displayed parameter.
iH Dry Pumping Systems 1-23
To Next Page
Loading...
