787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Normal Procedures -
Amplified Procedures
Copyright © The Boeing Company. See title page for details.
D615Z003-TBC NP.21.37
Landing Procedure ILS/GLS
Pilot Flying Pilot Monitoring
Notify the cabin crew to prepare for
landing. Verify that the cabin is secure.
Call “FLAPS___” according to the flap
extension schedule.
Set the flap lever as directed.
When on localizer intercept heading:
• verify that the navigation radios are tuned and identified
• verify that the deviation pointers are shown
Arm the APP mode.
Use HDG SEL/TRK SEL or HDG HOLD
/TRK HOLD to intercept the final
approach course as needed.
Verify that the localizer is captured.
Call “GLIDESLOPE ALIVE.”
At glideslope alive, call:
• “GEAR DOWN”
• “FLAPS 20”
Set the landing gear lever to DN.
Set the flap lever to 20.
Set the speedbrake lever to ARMED.
At glideslope capture, call “FLAPS___” as
needed for landing.
Set the flap lever as directed.
Set the missed approach altitude on the
MCP.
Call “LANDING CHECKLIST.” Do the LANDING checklist.
At the final approach fix or OM, verify the crossing altitude.
Monitor the approach.
Verify the autoland status at 500 feet radio altitude.
February 15, 2010
To Next Page
Loading...
