Boeing 787-8 - Page 615

787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Communications -
MFD Communications Functions
Copyright © The Boeing Company. See title page for details.
D615Z003-TBC 5.40.33
Box prompts are initially displayed. Enter the ICAO four letter identifier for the
desired ATC center. The display changes to dashed prompts after establishing an
ATC connection.
Normally displays the flight number entered on the FMC route page. When the
flight number is not available, box prompts are displayed. Flight number entry on
this page is copied to the FMC route page. Changing this entry after establishing
an ATC connection cancels the ATC connection.
Displays flight number airport of origin.
Displays flight number destination airport.
Displays the status of the ATC connection, ESTABLISHED or NOT
ESTABLISHED.
Displays the ATC facility identifier where a connection is established.
Displays the ATC facility identifier to which an automatic handoff transfers the
connection.
Displays status of ADS connection.
1
LOGON TO
2
FLIGHT NUMBER
3
ORIGIN
4
DESTINATION
5
ATC CONNECTION
6
ACTIVE CENTER
7
NEXT CENTER
8
ADS STATUS
June 16, 2008