Data Unit min. typ. max.
Output current (peak value) mA 60
Output current (rms value) mA 40
Tab. 8-3: Resolver encoder supply
Switching off power supply via
firmware
The "parking axis" firmware command (C1600) causes the encoder power
supply to be switched off.
DOK-INDRV*-CXX02******-PR03-EN-P Bosch Rexroth AG 93/143
IndraDrive Control Sections CSB02, CSE02, CSH02, CDB02
Technical data - functions
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
To Next Page
Loading...
