Brady BMP 71 - Updating Printer Firmware

Introduction
Firmware Upgrades
4
BMP71 User’s Manual
*Exposing the BMP71 printer to direct sunlight is not recommended.
WARNINGWARNINGWARNING
Avoid using the system near water, in direct sunlight, or near a heating device.
Do not attempt to use batteries other than those recommended in this manual.
Firmware Upgrades
Future upgrades to BMP71 firmware can be downloaded from Brady’s website. Access
www.bradyid.com/bmp71, click Support>Downloads, then select BMP71 from the list of
products.
Environmental Operation Storage
Temperature* (Printer) 5° to 49° C (40° to 120° F)
Be mindful, when using the
AC adapter with the printer,
that the AC adapter is rated
at a maximum temperature
of 30° C (86° F).
-30° to 60° C (-24° to 140° F)
Relative Humidity
(Printer)
10% to 90 % (non-
condensing)
10% to 90% (non-
condensing
Temperature (AC
Adapter)
0 to 30° C (30° - 86° F) -20° 85° C (-68° - 185° F)
Relative Humidity (AC
Adapter)
10% to 90% (non-
condensing)
5% - 90% (non condensing)