59
Labels and Areas
Justification
BMP71 User’s Manual
Justification
Justification refers to the alignment of data between boundaries on a label or in an area. There
are two types of justification: horizontal and vertical. Horizontal justification (H. Justify)
aligns data between the left and right boundaries of a label or area, while Vertical justification
(V. Justify) aligns data between the top and bottom boundaries of a label or area. Justification
is applied to an area or a label. It cannot be applied line-by-line.
To apply justification:
1. Navigate to the label or area where justification is to be applied.
2. To apply justification to a label, press Label .
OR
To apply justification to an area, press Area .
3. Choose H. Justify or V. J u s t i f y.
4. Choose the horizontal or vertical justification desired.
5. Press OK or Enter .
Every line of data on the label or in an area is justified according to the option selected. When
adding a new label, the justification maintains the current justification settings, but you can
change it again. Different justification can be applied to individual labels in a multi-label file
or different areas on one label.
To Next Page
Loading...
