Labels and Areas
Add Label or Area
56
BMP71 User’s Manual
Label Length
Auto length is the default for continuous media. With Auto Length, the label will be as long as
it needs to be to accommodate the entered data, up to a maximum of 40 inches. You can,
however, set a fixed length for a label. A different length can be set for each label in a file.
To change the length of the label:
1. Press .
2. Choose Length>Fixed.
3. In the text entry box displayed, enter the desired length of the label.
The unit of measure for the length is determined in the Setup menu. (See “Setup
Language” on page 28 for more information.)
4. Press OK or Enter .
To Next Page
Loading...
