Power Source
Printer Driver Installation
10
BMP71 User’s Manual
2. From the Autoplay pop-up window, click “Open folder to view files.”
3. Open the Autoplay folder.
4. Open the Print Driver folder.
5. Double click PrinterInstall.exe.
6. On the “User Account Control” window, click Yes.
7. When the Power Down message displays, shut off the printer (if not already off), then
click OK.
8. When the Power UP message displays, restart the printer, then click OK.
Your PC will automatically install the driver. When complete, a balloon message at the bottom
right indicates “Your device is ready to use.”
Download Print Drivers
You can also download the print drivers from the Brady website at www.bradyid.com. On the
website, choose Support>Downloads, then follow the instructions on the screen.
To Next Page
Loading...
