65
Labels and Areas
Vertical Text
BMP71 User’s Manual
Vertical Text
In Vertical text, each character drops down a line below the preceding character.
Example: The word “WIRE” as vertical text displays as such:
W
I
R
E
Vertical text can only be applied to an area or a label. It cannot be applied line-by-line.
To format text vertically:
1. Navigate to the label or area where you want to display text vertically.
2. Press Label .
OR
Press Area .
3. Choose Verti cal>On.
4. Press OK or Enter .
The word(s) display vertically on the label or in the area.
To Next Page
Loading...
