100-214-276 Rev. 3
Foreword
Congratulations on your choice of a Branson Ultrasonics Corporation system!
The Branson 2000X Series system is process equipment for the joining of plastic parts using
ultrasonic energy. It is the newest generation of product using this sophisticated technology for
a variety of customer applications. This Instruction Manual is part of the documentation set for
this system, and should be kept with the equipment.
Thank you for choosing Branson!
Introduction
This manual is arranged into several structured chapters which will help you find the information
you may need to know to safely handle, install, set up, program, operate, and/or maintain this
product. Please refer to the Table of Contents and/or the Index of this manual to find the infor-
mation you may be looking for. In the event you require additional assistance or information,
please contact our Product Support department (see How to Contact Branson
on page 1-10 in
Chapter 1, for information on how to contact them) or your local Branson representative.
2000X aed
Actuator
Instruction Manual
DOC EXPIRES 12PM 7/24/2012. Article or Material must comply with the requirements
stipulated by RoHS in its current version
To Next Page
Loading...
Need help?
General
