Brocade Communications Systems DCX 8510-4 User Manual

Brocade DCX 8510-4 Backbone Hardware Reference Manual 97
53-1002177-06
Brocade DCX 8510-4 chassis removal and replacement
5
“Factory Serial Num” and “Serial Num” are listed under “Chassis/WWN Unit 1.” If the current
WWN cards are the original cards, the factory serial number listed is the same as the chassis
serial number.
switch:admin> chassisshow
Chassis Backplane Revision: 1F
SW BLADE Slot: 1
Header Version: 2
Power Consume Factor: -50
Factory Part Num: 60-0001532-03
Factory Serial Num: KP000000195
Manufacture: Day: 1 Month: 1 Year: 2007
Update: Day: 14 Month: 3 Year: 2012
Time Alive: 187 days
Time Awake: 3 days
<output truncated>
CHASSIS/WWN Unit: 1 (in same assembly as WWN Unit: 2)
Header Version: 2
Power Consume Factor: -3
Factory Part Num: 60-0001501-07
Factory Serial Num: FT02X805BE2
Manufacture: Day: 26 Month: 3 Year: 2007
Update: Day: 14 Month: 3 Year: 2009
Time Alive: 207 days
Time Awake: 3 days
<output truncated>
switch:admin>
6. Create a SAN “profile” by entering and recording the information provided by the following
commands:
• nsShow
• nsAllShow
• switchShow -qsfp
• fabricShow
Copy the command output into a text file named “SANbefor.txt.” After the Brocade DCX 8510-4
is restored to the fabric, this information can be used to verify that no unintentional changes
have occurred to the fabric.
switch:admin> nsshow
Enter Pid COS PortName NodeName TTL
<output truncated>
switch:admin> nsallshow
12 Nx_Ports in the Fabric
<output truncated>
switch:admin> switchshow
switchName: switch
<output truncated>

Brocade Communications Systems DCX 8510-4 Specifications

General

Brand	Brocade Communications Systems
Model	DCX 8510-4
Category	Switch
Language	English