Brocade DCX 8510-4 Backbone Hardware Reference Manual 121
53-1002177-06
Environmental regulation compliance
A
Machine noise information regulation – 3. GPSGV, the highest sound pressure level value is 79.0
dB(A) in accordance with EN ISO 7779.
Laser compliance
This equipment contains Class 1 laser products and complies with FDA Radiation Performance
Standards, 21 CFR Subchapter I and the international laser safety standard IEC 825-2.
Use only optical transceivers that are qualified by Brocade Communications Systems, Inc. and
comply with the FDA Class 1 radiation performance requirements defined in 21 CFR Subchapter I,
and with IEC 825-2. Optical products that do not comply with these standards might emit light that
is hazardous to the eyes.
Regulatory compliance standards
The following table lists the regulatory compliance standards for which the Brocade DCX 8510-4 is
certified.
Environmental regulation compliance
This section describes the China RoHS environmental regulatory compliance requirements for the
Brocade DCX 8510-4.
TABLE 24 Regulatory compliance standards
Country Standards Agency Certifications and Markings
Safety EMC Safety EMC
United States Bi-Nat UL/CSA 60950-1
2nd Ed or latest
ANSI C63.4 cCSAus FCC Class A and
Statement
Canada Bi-Nat UL/CSA 60950-1
2nd Ed or latest
ICES-003 Class A cCSAus ICES A and Statement
Japan CISPR22 and JEIDA
(Harmonics)
VCCI-A and Statement
European Union EN60950-1 2nd Ed or
latest
EN55022 and
EN55024
TUV-GS, N CE marking
Australia, New Zealand EN55022 or CISPR22
or AS/NZS CISPR22
C-Tick mark
Argentina IEC60950-1 2nd Ed or
latest
“S” mark
Russia IEC60950-1 2nd Ed or
latest
51318.22-99 and
51318.24-99 or latest
GOST mark GOST mark
Korea KN22 and KN24 KC mark Class A
China (PS only) GB4943-2001 and
GB9254-1998 or latest
GB17625.1-2003 or
latest
CCC logo CCC logo
Taiwan (PS only) CNS 14336(94) or
latest
CNS 13438(95) or
latest
BSMI mark BSMI mark