Brocade Communications Systems DCX 8510-4 User Manual

Brocade DCX 8510-4 Backbone Hardware Reference Manual 55
53-1002177-06
Determining the status of a WWN card
4
Figure 17 displays the WWN bezel (logo plate). The WWN cards are under the bezel.
FIGURE 17 WWN bezel (logo plate) for DCX 8510-4
WWN unit is being faulted. 0x24c (fabos): Switch: switchname, Critical
EM-WWN_UNKNOWN, 1, Unknown WWN #2 is being
faulted
or
<timestamp>, [EM-1003], 40, SLOT 7 | FFDC |
CHASSIS, CRITICAL, Brocade_DCX, WWN 2 has unknown
hardware identifier: FRU faulted
or
<timestamp>, [EM-1034], <sequence-number>,,
ERROR, <system-name>, WWN # set to faulty,
rc=<return code>
WWN unit is not present or is not
accessible.
0x24c (fabos): Switch: switchname, Error
EM-WWN_ABSENT, 2, WWN #1 not present
or
<timestamp>, [EM-1036], <sequence-number>,,
WARNING, <system-name>, <FRU Id> is not
accessible.
Writing to the FRU history log
(hilSetFruHistory) has failed.
0x24c (fabos): Switch: switchname, Error
EM-HIL_FAIL, 2, HIL Error: hilSetFruHistory
failed, rc=-3 for SLOT 3
WWN unit insertion was detected <timestamp>, [EM-1049], <sequence-number>,,
INFO, <system-name>, FRU WWN # insertion
detected.
WWN unit removal was detected <timestamp>, [EM-1050], <sequence-number>,,
INFO, <system-name>, FRU WWN # removal detected.
TABLE 8 Messages that may indicate WWN card failure (Continued)
Type of message Sample error message

Brocade Communications Systems DCX 8510-4 Specifications

General

Brand	Brocade Communications Systems
Model	DCX 8510-4
Category	Switch
Language	English